Módulos de Sellado Rectangulares MCT · S1 / S2 / S3
Una familia de módulos, una lógica de rango de cables, dimensionados para encajar en el recorte rectangular que ya tiene.
Los módulos S1, S2 y S3 comparten la misma geometría de canal y pasos de rango de cables en tres profundidades — 60 mm, 40 mm y 30 mm — por lo que un marco menos profundo o más profundo no obliga a un rediseño. Se cubren diámetros de cable de 3 mm a 99 mm en todo el rango de tamaños.
Antes de realizar su pedido
Verifique el paso del canal de su marco y la profundidad disponible con la tabla de referencia cruzada a continuación. La profundidad del módulo (L) debe coincidir o encajar dentro de la cavidad del marco.
Tabla de especificaciones
Serie S1 — tapón central, L = 60 mm
Módulos de profundidad completa para cavidades de marco rectangulares estándar. Cada modelo cubre una ventana de rango de cables fija; seleccione por el diámetro que necesita sellar.
| Modelo | Canales | Rango de cables | Tamaño externo | Peso |
|---|---|---|---|---|
| M15S1 | 1 | 3–11 mm | 15 × 15 mm | 02 kg |
| M20S1 | 1 | 4–14,5 mm | 20 × 20 mm | 04 kg |
| M30S1 | 1 | 10–25 mm | 30 × 30 mm | 08 kg |
| M40S1 | 1 | 21–32 mm | 40 × 40 mm | 14 kg |
| M60S1 | 1 | 28–54 mm | 60 × 60 mm | 32 kg |
| M60V2S1 | 2 | 24–54 mm | 60 × 60 mm | 64 kg |
| M80S1 | 1 | 48–71 mm | 80 × 80 mm | 0.6 kg |
| M120S1 | 1 | 67.5–99 mm | 120 × 120 mm | 1.2 kg |
Material: EPDM + silicone rubber diaphragm.
Shallower-depth variants
S2 (L = 40 mm) and S3 (L = 30 mm)
Same cable-range logic as S1, in shorter and lighter bodies, for frames where cavity depth is limited. Cable range across the S2/S3 line covers 3–32 mm.
| Series | Depth (L) | Size reference | Rango de cables | Notes |
|---|---|---|---|---|
| S2 | 40 mm | M15S2 – M40S2 | 3–32 mm | Mirrors S1 sizes M15–M40 at reduced depth |
| S3 | 30 mm | M15S3 – M40S3 | 3–32 mm | Shortest body, for space-constrained cavities |
Full size range for S2 and S3 mirrors S1's smaller models (M15–M40). Request the complete list with your enquiry.
Cross-reference table
Existing module → DEWIN equivalent
Describe your current module by its dimensions. This table maps common rectangular module sizes to the closest DEWIN model and the cut-out check to confirm before ordering.
| Your current module | DEWIN equivalent | Frame cut-out | Fit check |
|---|---|---|---|
| 15 × 15 mm, 1 channel | M15S1 | 120-frame single-channel | Drop-in, no rework |
| 20 × 20 mm, 1 channel | M20S1 | 120-frame single-channel | Drop-in, no rework |
| 30 × 30 mm, 1 channel | M30S1 | 120-frame single-channel | Drop-in, no rework |
| 60 × 60 mm, 2 channels | M60V2S1 | 120-frame dual-channel | Confirm channel pitch |
| 80 × 80 mm, 1 channel | M80S1 | 120-frame single-channel | Confirm cavity depth ≥ 60 mm |
| 120 × 120 mm, 1 channel | M120S1 | 120-frame single large channel | Confirm cavity depth ≥ 60 mm |
Applications
Where these modules are specified.
Energy storage
BESS containers
Rectangular entries between battery racks and control compartments, matched to existing 120-frame cut-outs without modifying the container wall.
Sizing guide →Data centre
Modular hall penetrations
Dense rectangular penetrations through prefabricated wall panels, re-openable when cable runs are added later.
Sizing guide →Switchgear
Control panel entries
Standard rectangular cut-outs, so an existing enclosure design needs no rework to qualify a second source.
Sizing guide →Imagery
Installed detail and factory evidence.
Certification scope and test documentation for MCT frames and sealing systems are listed on our certifications page.
Enquiry
Confirm fit before you quote.
Send your cable range or existing module size. We reply with model recommendation, drawing, and a free sample.
English 
Español de México 
Deutsch 
Français 
العربية 
Русский